Using the Terminal’s Keyboard—Chapter 3
81TE 2000
5250 Terminal Emulation Programmer’s Guide
CV60 Vehicle Mount Computer
For help with using the CV60 Vehicle Mount Computer, refer to the
CV60 Vehicle Mount Computer User’s Guide (P/N 961-054-033).
Characters on the Keyboards
The special characters and functions printed above the keys are color-
coded to correspond with the matching shift keys. The shift keys are:
[Blue] Press [Blue] plus a key to type a character or do an operation printed in blue
on the overlay.
[Gold] Press [Gold] plus a key to type a character or do an operation printed in
gold on the overlay.
CV60 Software Input Panels
Software Input Panels (SIPs) are based on the 700 Series SIPs (page 63),
with additional features. You can change the color of up to ten keys, given
four color choices (including the original gray. To change the color of the
keys (only up to 10 keys):
1 Hold the LEFT Shift key down until it reverses back to normal.
2 Hold the RIGHT Shift key down until it reverses back to normal.
3 Se lect the letter that represents the color to which to switch.
4 Select from the three colors listed in the dialog box, or select the option
to return all of the affected keys back to gray.
You can change the size of the SIP to one-times, two-times or three-times
the length and width of the original size. Thu s, each SIP can be 240x80,
480x160, or 720x 240 pixels (wide by tall). To change the size of the keys: :
1 Hold the Left Shift Key down until it reverses back to normal.
2 Pressandholdthe“-”keyuntiltheSizeSelectiondialogappears.
3 Of the three options, select the sized keyboard of your choice.
To Next Page
Loading...
