Extended Commands—Chapter 7
323TE 2000
5250 Terminal Emulation Programmer’s Guide
UPC
Note: 6400 Computers do not support UPC-E Number System 1.
Use the UPC command to select the combinations of characters listed in
the following table. Note that a “b” indicates a 1-byte space.
UPC Bar Code Cha racters
(6400, 5055, 59XX, 17XX, 11XX)
Character
UPC-E #
System 1
Expand UPC-E
to UPC-A
UPC-E #
System 0
Add-ons UPC-A
0 Disables all.
1 X X
2 XX
3 X X X
4 XX
5 X X X
6 XX X
7 X X X X
8 XX
9 X X X
10 XXX
11 X X X X
12 XX
13 X X X X
14 XXX X
15 X X X X X
b No change from current setting.
EAN Algorithms
Use EAN Algorithms to select combinations of EAN options. Note that a
“b
”isa1-bytespace.
EAN Algorithms — Line 1, Column 12
(6400, 5055, 59XX, 17XX, 11XX Terminals)
Character Description
0 EAN disabled
1 EAN with Add-ons enabled
2 EAN enabled
3 EAN and EAN with Add-ons enabled
b No change from current s etting
To Next Page
Loading...
