Extended Commands—Chapter 7
327TE 2000
5250 Terminal Emulation Programmer’s Guide
Code 128
The following table lists Code 128 characters. Note that a “b” indicates a
1-byte space.
Code 128 Characters — Line 1, Column 19
(6400, 5055, 59XX, 17XX, 11XX)
Character Description
0 Code 128 disabled
1 Code 128 e nabled
b No change from current s etting
Straight or Computer Identics 2 of 5
If the Straight or Computer Identics bar code is enabled, select the maxi-
mum and minimum lengths and the first and second fixed bar code
lengths according to your requirements. Note that a “b” indicates a 1-byte
space. Refer to the manufacturer’s bar code specifications for more information.
2 of 5 Characters
(6400, 5055, 59XX, 17XX, 11XX)
Character Description
20 0=Straight and Computer Identics 2 of 5 dis abled; 1=Computer Identics 2 of 5 enabled; 2=Straigh t 2
of 5 enabled; b
=No change from current setting
21–22 XX=Maximum length Straight or Computer Identics 2 of 5; bb=No change from c urrent setting
23–24 XX=Minimu m length Straight or Computer Identics 2 of 5; bb=No change from c urrent setting
25–26 XX=1st fixed bar code length for Straight or Computer Identics 2 of 5; bb=No c hange from current
setting
27–28 XX=2nd fixed bar code length for Straight or Computer Identics 2 of 5; bb=No change from c urrent
setting
To Next Page
Loading...
