Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
135TE 2000
 5250 Terminal Emulation Programmer’s Guide
4) Display Opts (2415, 2425, 2435A, 2455, 2475, 248X, 5055, 5020, 6400, 59XX,
17XX, 11XX)
4) Display Opts adjusts the backlight timer, the cursor appearance on the
display, or the remote display.
Display Opts
1) Backlight
2) Cursor Mode
3) Remote Disp
1) Backlight is for 2415, 2425, 2435A, 2455,
2475, 248X, 6400, 17XX, 11XX
3) Remote Disp is for 17XX
1) Backlight (2415, 2425, 2435A, 2455, 2475, 248X, 6400, 17XX, 11XX)
Use the up and down arrows to select “Off” or a number from “1–60” for
2415, 2425, 2435A, 2455, 2475, and 248X Terminals or from “1–255”
for 6400, 17XX, and 11XX Terminals. This would dictate the number of
seconds that the backlight stays on after a key is pressed.
Backlight Timer
Use Cursor Up
And Down Keys
To Adjust
xxx
2) Cursor Mode
Selects the cursor style. Af ter making a selection, press [Enter] to return to
the 4) Display Opts menu. The cursor shape is shown between “>” and
“<”.
1) Underline Blink (blank for 5020)
Causes the underline character to appear and disappear in its current loca-
tion.
2) Block Blink (blank for 5020)
Causes the block (J) character cursor to appear and disappear in its cur-
rent location.
3) Underline (6400, 5020, 59XX, 17XX, 11XX)
This option provides a solid underline character to display the cursor’s cur-
rent location.