Intermec CK30

Customizing Your Configuration—Chapter 5
199TE 2000
 5250 Terminal Emulation Programmer’s Guide
Bar Code Parameters
Note that brackets indicate default settings and values.
Bar Code Parameters
Parameters
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
parameter
BC Type Character BC Type Char Enabled, [Disabled] 6400, 11XX, 17XX,
59XX, 700 Series,
CK30, CV60
Code 39 Encoded Code 39 Encoded Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Concatenate Concatenate Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055, 700
Serie s, CK30, CV60
MOD 10 Check MOD 10 Check Enabled, [Disabled] 6400, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
ParmsBySession ParmsBySes sion Enabled, [Disabled] 6400, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
Redundancy Redundancy E nabled, [Disabled] 6400, 11XX, 17XX,
59XX
RS-232 Stre am RS-232 Stream Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X, 5020
Scan All Fields Scan All Flds Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Scan Postamble
Character
Scan PostChar Numeric, minimum = 0,
maximum = 255 [0]
6400, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
Scan Preamble
Character
Scan PreChar Numeric, mini mum = 0,
maximum = 255 [0]
6400, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
Scan Timeout Scan Timeout Numeric, mi nimum = 1,
maximum = 200 [30]
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Scanner Type
6400, 5055 support
Laser only
Scanner Type [No Scanner], Wand, Las er,
Wand Emulate, Auto
Detect
6400, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60