Intermec CK30

Customizing Your Configuration—Chapter 5
219TE 2000
 5250 Terminal Emulation Programmer’s Guide
TE_SETTINGS.INI Parameters and Qualifiers
Note: If par ameters are duplicated, an error is not generated. Instead, the
terminal processes the entire file and uses the last entered value of the du-
plicated parameter.
Parameters in the set-up f ile apply to all model numbers unless otherwise
noted here. The following pages list each parameter and its qualifiers.
Some qualifiers have default values. If you want to use the default value,
you can omit the qualifier from the parameter set-up file.
The CFGLIT.DAT file specifies the text of set-up menus or system messa-
ges. Parameters and qualifier strings in the set-up file assume you are using
the default CFGLIT.DAT file. To customize CFGLIT.DAT, see “Chang-
ing Text” on page 232.
Note: Only WTP terminals support dual sessions (“Session 2”). For a list
of terminals with WTP, see Chapter 1, “Getting Started.”
Set-Up Parameters Options
Note that brackets indicate default settings and values.
Set-Up Parameters Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CK30, CK31, CV60)
Session 4 (700 Series, CK30, CK31, CV60)
Values
Terminals using this
option
Data Stream host_a|data_stream (default)
host_b|data_stream
host_c|data_stream
Native (blank if UDP
Plus or TCP/IP),
3270, 5250,
[VT/ANSI]
700 Series, CK30,
CK31, CV60
Host Name host_a|host (default)
host_b|host
host_c|host
String, minimum = 0,
maximum = 16 [null
string]
700 Series, CK30,
CK31, CV60
Port Number host_a|port_number (default)
host_b|port_number
host_c|port_number
Numeric, mi nimum =
0, maximum = 65535
[23]
700 Series, CK30,
CK31, CV60
Radio Number
(same as unit
numbe r)
host_a|radio_# (default)
host_b|radio_#
host_c|radio_#
Numeric, mi nimum =
0, maximum = 127
[127]
700 Series, CK30,
CK31, CV60
RTC over TCP host_a|rtc_over_tcp (default)
host_b|rtc_over_tcp
host_c|rtc_over_tcp
Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Server IP host_a|server_ip (default)
host_b|server_ip
host_c|server_ip
Numeric, mi nimum =
1, maximum = 16
[16]
700 Series, CK30,
CK31, CV60
SNA sna Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Telnet telnet Enabled, [Disabled} 700 Series, CK30,
CK31, CV60