Intermec CK30

Using the Terminal Emulation MenusChapter —4
178 TE 2000
 5250 Terminal Emulation Programmer’s Guide
To Exit Emulation Mode and Return to DOS
Do a cold-restart to exit the current emulation program and return back to
the DOS keyboard layout. Press [Y],press[Enter] several times to put you
at the DOS C:\ prompt. To exit to the beginning of the current emula-
tion, press and hold [Blue] and [Yellow],andboth[ENT] keys to do the
hard reset.
5055 Data Collection PC
If you are running terminal emulations and ever update the DOS load
on the internal SanDisk IDE drive on the 5055 PC, be aware that
when updating 50DS1000, avoid copying the CONFIG.SYS and
AUTOEXEC.BAT files. The new versions of these two files may
interfere with existing applications, such as Terminal Emulations. If
affected, Terminal Emulations will automatically run on boot up.
In all other situations, do copy the CONFIG.SYS and
AUTOEXEC.BAT files.
This contains information about the terminal emulations with keyboards
supported for the Intermec
R
5055 Data Collection PC.
The 5055 PC supports terminal emulations with rugged keyboards.
FWP650H0 i s DOS-based and is not compatible with Windows DOS
prompts.
An external PS/2-compatible keyboard is required for configuring and us-
ing terminal emulations.
Terminal emulation font files are needed to generate the various character
fonts. See the related terminal emulation programmer’s reference guide for
additional information.
Programs to Create Terminal Emulation Menus
The Terminal Emulation Menu Screens are provided to support terminals
running Intermec Terminal Emulation software. This describes the menus
that set operating and scanning parameters for the 5055 PC. Additional
information can be found in the programmer’s guide or technical overview
for your emulation program.
When you power on the 5055 PC, the AUTOEXEC.BAT f ile executes
the following programs, in sequential order, to create the terminal emula-
tion menus. Listed are their descriptions.
S LSL
Creates the link layer for the protocol stack.
S rl2pcm
Includes the Proxim radio driver for the Proxim RangeLAN2 radio, or
wvlan43
Includes the WaveLAN/IEEE radio driver for the 802.11b HR radio.
S 6500ikps
Installs multitasking, beeper, and key r emapping TSRs.