Extended CommandsChapter —7
314 TE 2000
5250 Terminal Emulation Programmer’s Guide
Return Codes for Set Parameters
The Set Parameters return code is the status sent to the host computer.
The following chart lists re turn codes.
Code Description Column
0 Good status, transaction complete. (None)
1 Reserved. (None)
2 Backlight timer parameter invalid. 4-6
3 Sleep mode timer parameter invalid. 7–9
4 Cursor set parame t er invalid. 10
5 Screen mode parameter invalid. 11
6 Reserved. (None)
7 Remote display paramete r invalid. 12
8 Beeper volume parameter invalid. 16–18
9 Beeper frequency parameter invalid. 19–21
A Beeper length parameter invalid. 22–24
B Stream scan parameter invalid. 13
C Sc an all fields parameter invalid. 14
D Error mode parameter invalid. 15
E Incorrect setting for number of rows. 25–27
F Incorrect se tting for number of columns. 28–30
To Next Page
Loading...
