Intermec CK30

Customizing Your ConfigurationChapter —5
186 TE 2000
 5250 Terminal Emulation Programmer’s Guide
5 From the Choose File box on the host computer, select the file to be
downloaded to the 5020 Terminal, then click Open to place the path
and file name on the File Upload form.
6 On the host, click Upload File to continue, or c lick Clear to clear the
form and start again. The screen with the parent directory is ref reshed.
If successful, the following confirmation message will appear on the host
computer, where “Filename” is the file that was downloaded to the
5020 Terminal: Uploaded file “Filename”
Copying a File
Use the File Manager from the host computer to make a copy of a file.
Repeat steps 1 through 3 of “Downloading a File”, then do the following:
1 Click the option button next to the file you want to copy, then click the
Copy button to access the Copy File screen.
2 To save the copied file to the same directory as the original file, enter a
unique file name in the New Name f ield, then click Copy File to create
a copy of the file. The screen showing the parent directory is refreshed.
If successful, the following confirmation message will appear on the host
computer, where “Filename” is the original file and “New Filename” is
the copy: “Filename” copied to “New Filename”
6400, 5055 Terminals
Use INTERLNK/INTERSVR communications to c onnect your ter minal
to a personal computer. For help, see “Downloading Files” on page 251.
Load AUTOLOG.SCR into drive C, where the TE application is stored.
59XX, 17XX, 11XX Terminals
The download process re qu ir es flash and utility files.
1 Using FLSHCONV.EXE from the TOOLS.EXE file from the flash
program, append the AUTOLOG.SCR file to the end of the .HEX pro-
gram.Forhelp,see“Downloading Files” on page 251. Below are sample
command lines for each terminal type:
S 11XX Terminal with 256K flash (this uses 1180, but applies to all rad i o types) :
flshconv –eC000 –a fwp118c0.hex AUTOLOG.scr
–oNEW1180.HEX
S 11XX Terminal with 512K flash (this uses 1180, but applies to all rad i o types):
flshconv –eFFC0 –a fwp118h0.hex AUTOLOG.scr
–oNEW1180.HEX
S 17XX Terminal (example uses 1780, but applies to all radio types);
flshconv –eFFC0 –a fwp178h0.hex AUTOLOG.scr
–oNEW1780.HEX
S 59XX Terminal (example uses 5980, but applies to all radio types):
flshconv –eE000 –a fwp598h0.hex AUTOLOG.scr
–oNEW5980.HEX