Intermec CK30

Customizing Your Configuration—Chapter 5
189TE 2000
 5250 Terminal Emulation Programmer’s Guide
Sample Auto-Login Script Files
You can use these sample script files as they are or as the starting point for
creating your own auto-login script files.
Example 1
Auto-Login With All Terminals Using the Same Account
HostName “*” #Use this to log into any host
WaitFor “login:” #Wait for the login prompt
Send “username<NEWLN>” #Send the user name
WaitFor “Password:” #Wait for the password prompt
Send “letmein<ENTER>” #Send the password
S The HostName command matches the host the user accesses.
S The WaitFor command waits for a string to be displayed by the host. WaitFor takes up to 10
strings, 20 characters long. The strings must be enclosed in quotes and separated by a comma.
S The first Send command sends a fixed user name. The second Send command sends a fixed
password.
S Angle brackets < and > can enclose uppercase mnemonics or hexadecimal values.
Example 2
Auto-Login With Different User Names and Passwords
Input “Enter user name”, username #Prompt for user name
InputHidden “Enter password”, password #Prompt for password
HostName “*”
WaitFor “login:” #Wait for login prompt
Send username #Send the user name
Send “<NEWLN>” #Send a carriage return
WaitFor “Password:” #Wait for password
prompt
Send password #Send the users password
Send “<ENTER>” #Send a carriage return
S The Input and Send commands use input variables. Input commands require a prompt string
followed by a comma and a variable name in which to store the string.
S The InputHidden command displays “*” i n place of any characters the user types. Place all Input
commands before the first HostName command.
S The Send command only accepts a single argument, so you need two Send commands to send the
user name and a carriage return.