Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
167TE 2000
 5250 Terminal Emulation Programmer’s Guide
4) Keyboard Test (6400, 5055, 59XX, 17XX, 11XX)
Tests each key on the terminal keypad or 5055 external keyboard. Press
each key, except the [Enter] key, and a character corresponding to the
pressed key should appear on the display.
Keyboard Test
Press a key.
ENTER To exit
Key =
hex(0033) = 3
5) Scanner Test
This option tests the operation of an attached bar code scanner. From this
menu, scan an enabled bar code. The bar code and the bar code length
should appear on the display to pass. Press [Enter] to exit the test.
Scanner Test
Scan Code>
TEST-SHEET
Length>10
2) Converters (59XX)
Use this option to test the analog-to-digital (A to D) and the digital-to-
analog (D to A) converters. The RSSI Test (not available on all radios)of-
fers a choice of graphics displays of the r e ceiv ed radio signals. Press any key
to exit.
Converters
1)AtoD
2)DtoA
3)