Intermec CK30

Customizing Your Configuration—Chapter 5
191TE 2000
 5250 Terminal Emulation Programmer’s Guide
Auto-Login Restart
The Auto-Login Restart command starts the auto-login script file from the
correct HostName statement in the script f ile when a host session is bro-
ken. For this command to work, the WaitFor string must match the last
data sent from the host. For example, if the WaitFor string is the login
prompt “login:” with a space after the colon, the WaitFor string must in-
cludeaspacefortheauto-loginrestarttowork.
To use the Auto-Login Restart command, press the keys listed in Chapter
3, “Using the Terminal’s Keyboard.” Or, scan the following bar code.
Auto-Login Restart
*/EALRS*
*%ALRS*