Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
145TE 2000
 5250 Terminal Emulation Programmer’s Guide
3) COM Select (248X, 5055)
Selects which communications port to use for extended commands,
RS-232 communications, or media copy commands.
COM Select
1) COM 1
2) COM 2
2) LCD Parms (Parameters)
2) LCD Parms adjusts these Liquid Crystal Display (LCD) features:
S The screen size (number of rows displayed, and the number of charac-
ters displayed on each row).
S The screen mode (how the cu r sor positions itself on the display).
S Making all alphabetic character keystrokes uppercase characters.
S Scrolling window parameters.
LCD Parms
1) LCD Contrast
2) Screen Size
3) Screen Mode
4) Annunciators
5) Backlight
6) Key Uppercase
7) Scroll Window
1) LCD Contrast is for 59XX, 17XX
2) Screen Size is blank for 2480, 2485
4) Annunciators is blank for 17XX
5) Backlight is for 59XX, 17XX
1) LCD Contrast (59XX, 17XX)
Usethisoptiontoadjustthecontrastofthedisplaytoamorereadablelev-
el (range 0–255). Th e terminal u ses this setting as a baseline, automatically
readjusting contrast as necessary, based on temperature changes. Use the
up and down arrow keys to adjust the contrast, then press [Enter] to re-
turn to the LCD Parms screen.
LCD Contrast
Use Cursor Up
and Down Keys
To Adjust
xxx
Note: 2) Screen Size is available for 2415, 2425, 2435A, 2455, 2475,
2481, and 2486 Terminals on TE 2000 application version 7.00 or gr eater
and with Double-Byte Country Code equal to 00 (USA).