Using the Terminal’s Keyboard—Chapter 3
83TE 2000
5250 Terminal Emulation Programmer’s Guide
CV60 Keyboard
Note: You must use the 5250 keyboard (P/N: 850-551-004) with the TE
applications.
Gold
Blue
Gold
This illustration shows the keyboard for the CV60 Data Collection PC.
Note: The f ollowing key sequences are based on the SIP keyboards u nless
otherwise noted. Sequences provided are based on the assumption that you
are starting with the Main Keyboard.
CV60 Cursor Keys
To Enter Press the Alphanumeric Keys Tap the SIP Keys
Window/viewport up
}g
Window/viewport down
}k
Window/viewport right
}i
Window/viewport left
}m
CV60 Paging Keys
To Enter Press the Keys Tap the SIP Keys
Page up [Blue] }h
Page down
[Blue]
}l
Page right
[Blue]
}j
Page left
[Blue]
}f
To Next Page
Loading...
