Intermec CK30

Using the Terminal’s KeyboardChapter —3
40 TE 2000
 5250 Terminal Emulation Programmer’s Guide
6400 Field Exit
To Enter Press the Key
Field Exit [FLDX]
6400 Signal Keys
Press the Keys
To Enter 51-Key Keyboard 41-Key Keyboard
Attn [Blue] [8] [ATN]
Help (from error state) [Blue] [7] [Gold] [4]
6400 Special Control Keys
Press the Keys
To Enter 51-Key Keyboard 41-Key Keyboard
Del [Blue] [Í][Blue][Í]
Erase Input [Blue] [3] [Gold] [8]
Error Reset [Gold] [1] [RST]
Hex [Gold] [4] [Gold] [2]
Home [Gold] [3] [Gold] [7]
Insert [Blue] [5] [Gold] [9]
Shift Lock [Blue] [SHFT] [Blue] [SHFT]
6400 Special Host Key
Press the Keys
To Enter 51-Key Keyboard 41-Key Keyboard
Sys Req [Blue] [1] [Gold] [1]
6400 5250 Additional Functions
Press the Keys
To Enter 51-Key Keyboard 41-Key Keyboard
(New Line)
[Gold] [5]
[SHFT] [0]
Dup (duplicate enabled fields only) [Blue] [9] [DUP]
Field- [Gold] [9] [Gold] [6]
Field+ [Gold] [8] [Gold] [5]
Field Mark No key available. Scan bar code in Appendix A,
“Bar Code Scanning”.