Extended CommandsChapter —7
312 TE 2000
5250 Terminal Emulation Programmer’s Guide
Example of Receive Only
The following example and chart show what would be sent to the terminal
to cause data to be received. Note that “b”indicatesa1-bytespace.
b#G3N81bbbbbb500A0102FP10
Column 1 Column 23Column 11
Column Character Description
1 b This column typically contains a space.
2 # Extended command.
3 G Receive Only command.
4 3 4800 baud.
5 NNoparity.
6 8 Eight data bits.
7 1Onestopbit.
8–12 bbbbb Reserved.
13 bAIDkeyisEnter.
14–15 50 Receive a maximum of 50 charac ters.
16–17 0A Delimiter character is 0A hexadecimal (line feed).
18–19 01 Data se nt to host after one delimiter character is received
20–21 02 Start character is 02 hexadecimal (STX).
22 F Start character wi ll be returned to host.
23 P Parity errors will be flagged
24–25 10 Receive timeout length is 10 se conds.
To Next Page
Loading...
