Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
101TE 2000
 5250 Terminal Emulation Programmer’s Guide
6400, 5055, 59XX, 17XX, 11XX Menus
The following menus pertain to the 6400, 5055, 59XX, 17XX, and 11XX
Terminals.
To return to the Main Menu, press [Enter] several times, then select
6) Exit Menus,toreturntotheoperatingsystem.
LCD Parms
1) LCD Contrast
2) Screen Size
3) Screen Mode
4) Annunciators
5) Backlight
6) Key Uppercase
7) Scroll Window
Main Menu 2
1) Keyboard Opts
2) Save Parms
3) Cloning Opts
4) Session Menu
Tests
1) Peripherals
2) Converters
3) Memory View
4) Packet Driver
5) Numbers
6) Timed Numbers
Set-up Parms
1) Communication
2) Barcode Parms
3) Protocol Opts
4) Display Opts
5) Radio Comm
6) Cold Start
7) More
[1] [2]
[4]
[5] [7]
Version Info
Firmware
<TE Program Name>
Version <number>
Date <ddmmyy>
MLID Name ZZZZZZ
MLID ver xx.xx
(mac address)
Beeper Setup
1) Key Click
2) Error Tone
3) Beeper Select
[3]
Main Menu
1) Set-up Parms
2) LCD Parms
3) Beeper Setup
4) Tests
5) Version Info
6) Exit Menus
7) More
MLID Name
and MLID ver
are for 6400,
5055
4) Annunciators
is blank for
17XX, 11XX
3) Cloning Opts
is for 59XX, 17XX,
11XX
1) LCD Contrast and
5) Backlight
is for 59XX, 17XX
3) Beeper Select
is for 6400, 5055,
17XX, 11XX
2) Converters
is for 59XX