Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
137TE 2000
 5250 Terminal Emulation Programmer’s Guide
4) Display Opts (700 Series, CK30, CK31, CV60)
4) Display Opts adjusts the backlight timer, the cursor appearance on the
display, or the remote display.
Display Opts
1) Backlight
2) Cursor Mode
3) Select Font
4)
5) Display Colors
6) Font Quality
7) More
1) Backlight is for 700 Series
6) Font Quality is for CK30,
CK31
Display Opts
1) Code Page
1) Backlight (700 Series)
Use the up and down arrows to select “Off” or a number from “1–60” for
700 Series Terminals. This would dictate the number of seconds that the
backlight stays on after a key is pressed.
Backlight Timer
Use Cursor Up
And Down Keys
To Adjust
xxx
2) Cursor Mode
Selects the cursor style. Af ter making a selection, press [Enter] to return to
the 4) Display Opts menu. The cursor shape is shown between “>” and
“<”.
1) Underline Blink
Causes the underline character to appear and disappear in its current loca-
tion.
2) Block Blink
Causes the block (J) character cursor to appear and disappear in its cur-
rent location.
3) Underline
This option provides a solid underline character to display the cursor’s cur-
rent location.