Intermec CK30

Customizing Your ConfigurationChapter —5
218 TE 2000
 5250 Terminal Emulation Programmer’s Guide
TE_SETTINGS.INI Configuration
“enable_sip“ = 0 or 1
This enables or disables the interaction between the TE 2000 application
and the onscreen keyboard. If this value is 1, the TE 2000 application dis-
playstheSIPwhenitstartsandwhenitgainsfocus.Ifthisvalueis0,the
TE 2000 application does not display the SIP and it does not toggle the
SIP when you click the SIP toggle button.
“sip_settings“ = {674EC110-EFF0-47D3-B828-CDB2A6CCD3EB}
This is a GUID (globally unique identifier) that identifies the SIP that the
TE 2000 application is to use as its default. This can be the GUID of any
registered SIP in the system.
These are for debugging purposes only. They inform which version of the
TE 2000 application created the TE_SETTINGS.INI file.
S program_name = FWP700H0
S program_version = 7.53
TE_SETTINGS.INI Parameter Formats
Each parameter in the setup file is followed by one of three different for-
mats that indicates the type of parameter and the values it can contain.
Formats are as follows:
S Literal strings. List of fixed values to choose from. Session 1 or 2 may
qualify Screen Mode. It may take the value Center Cursor, Corner
Mode, Page Mode, Lazy Mode, or Locked Mode. Session 1 is the de-
fault qu alifier. These configuration lines are valid:
screen_mode = Lazy Mode;
session_1|screen_mode = Lazy Mode;
session_2|screen Mode = Lazy Mode;
S Numeric p arameters. Numeric parameters have minimum and maxi-
mum values. Parameters can be either decimal or hexadecimal:
S Decimal parameters consist of digits 0 through 9.
S Hexadecimal parameters consist of 0x or 0X, followed by 1 to 4 digits
of 0 through 9, a through f, or A through F. These are equivalent:
160, 0xA0, and 0Xa0.
Port Number is a variable with a minimum value of 0 and a maximum
of 65535. These lines are valid:
port_number = 1;
session_1|host_a|port_number = 1;
session_2|host_a|port_number = 1;
S String parameters. String parameters are variables with minimum and
maximum lengths.
Program Name is unqualified. It must have eight characters. These con-
figuration lines are valid:
program_name = ABCDEFGH;
program_name = FWP248H0;