Intermec CK30

89TE 2000  5250 Terminal Emulation Programmer’s Guide
Using the Terminal Emulation
Menus
4
This chapter lists all TE 2000 parameters. If a certain parameter does not
apply to your terminal, the parameter does not appear in the TE 2000 con-
figuration menus.
The CFGLI T.DAT file specifies the text of the TE 2000 configuration
menus. This chapter assumes you are using the default settings in
CFGLIT.DAT. To customize CFGLIT.DAT, see Chapter 5, “Customiz-
ing Your Configuration.”
Note: F or 700 Series, CK30, CK31, and CV60 Terminals with T E 2000
application versions 8.00 or greater, if a C ONFIG.DAT file is present on
your terminal, its settings are backed up in a CONFIG.OLD file, then
written i nto a TE_SETTINGS.INI file. If the CONFIG.DAT file is not
on your terminal, all settings are written to the TE_SETTINGS.INI file.