Intermec CK30

Using the Terminal Emulation MenusChapter —4
90 TE 2000
 5250 Terminal Emulation Programmer’s Guide
Function Keys
These paragraphs describe h ow to navigate through the TE 2000 configu -
ration menus.
Enter Key
Press the terminal [Enter] key to retur n to a previous TE 2000 configura-
tion menu. Press [Enter] several times to return to the Main Menu from a
submenu. This key also accepts the displayed or keyed input.
Terminals Related [Enter] Keys
2415, 2425, 2455, 2475, 248X
[ or \ keys
2435A
v key (57-key keyboard)
e key (48-key keyboard)
v key (39-key function nume ric keyboard)
6400 [ENT] keys
5020
b or e keys
5055 <Enter> via external keyboard
59XX [ENTER] key
17XX, 11XX [ENTER] keys
700 Series e key
Shift Keys
Use shift keys to put the keyboard in the desired shift mode. These shifted
key functions are shown on the keyboard overlays in Chapter 3, “Using the
Terminal’s Keyboard.”
S For 6400, 5055
Yellow and Blue shift keys are required. For the 5055 PC, the Yellow
shift key substitutes the <Alt> keyandtheBlueshiftkeysubstitutesthe
<Ctrl> key on the external keyboard.
S For 17XX, 11XX
Gold and Black shift keys are required.
Y (“Yes”) Key
Several displays provide a warning that a certain action can cause your ter-
minal to lose data stored in memory. Press the Y (“yes”) key to proceed as
instructed. Press another key to exit the menu without executing your
original choice.