Intermec CK30

Extended CommandsChapter —7
322 TE 2000
 5250 Terminal Emulation Programmer’s Guide
CC Byte 3
Note that “b”indicatesa1-bytespace.
CC Byte 3 Options Supported by Characters —
Line 1, Column 6
(6400, 5055, 59XX, 17XX, 11XX)
CC Byte 3
Enable Stream
Scanning
Reserved
Return Bar
Code Type
Bar Code
Concatenated
0
1 X
2 X
3 X X
4 X
5 X X
6 XX
7 X X X
8 X
9 X X
A XX
B X X X
C XX
D X X X
E XXX
F X X X X
b No change from current s e tting.
Bar Code Length
Bar Code Length sets the minimum and maximum character lengths for
all types of bar codes scanned. Setting the minimum and maximum values
to their optimum can increase scanning performance. If the terminal scans
bar codes that are outside the minimum and maximum value, the terminal
ignores the bar code. Note that a “b
” indicates a 1-byte space.
Bar Code Length — Line 1, Columns 7–10
(6400, 5055, 59XX, 17XX, 11XX)
Column Character and Description
7–8 XX=Bar code length. Maximum length: 99. bb=No change from current
setting
9–10 XX=Bar code lengt h. Minimum length: 00. bb=No change from current
setting