Intermec CK30

Using the Terminal’s KeyboardChapter —3
64 TE 2000
 5250 Terminal Emulation Programmer’s Guide
700 Series Keypads
This illustration shows a 700 Series Monochrome Mobile Computer (left), a 700 Series Color Mobile Computer with a numeric keypad
(middle), and a 700 Series Color Mobile Computer with an alphanumeric keypad (right).
Note: The f ollowing key sequences are based on the SIP keyboards u nless
otherwise noted. Sequences provided are based on the assumption that you
are starting with the Main Keyboard.
700 Series Cursor Keys
To Enter Tap the SIP Keys
Window/viewport up
}g
Window/viewport down
}k
Window/viewport right
}i
Window/viewport left
}m
700 Series Paging Keys
To Enter Tap the SIP Keys
Page up
}h
Page down
}l
Page right
}j
Page left
}f