Using the Terminal Emulation Menus—Chapter 4
155TE 2000
5250 Terminal Emulation Programmer’s Guide
5) Backlight (59XX, 17XX)
This adjusts the intensity (brightness) of the display backlight. The intensi-
ty can be set from 0 (off) to 15 (fully on). Keep in mind that the backlight
uses considerable battery power. To conserve battery power, keep the in-
tensity and duration of the backlight as low as possible. Use the up and
down arrow keys to adjust the intensity of the backlight. Press the up ar-
row key to increase the intensity, the down arrow key to decrease. Press
[Enter] when finished to return to the LC D Parms screen.
BLight Intensity
Use cursor up
and down keys to
Adjust.
xx
6) Key Uppercase
When enabled, 6) Key Uppercase causes the alphabetic keys (A–Z) to dis-
play as uppercase characters regardless of the shift or caps lock mode set-
tings.
7) Scroll Window (2415, 2425, 2435A, 2455, 2475, 248X, 6400, 5020, 5055,
59XX, 17XX, 11XX)
7) Scroll Window defines the cursor movement, just how far it moves
with each press of the arrow keys. Default is 1) Tab Size.
1) Tab Size
Moves the cursor by the amount configured for 3) Define Width and
4) Define Height.
2) Screen Size
Causes the cursor to move by the virtual screen size selected in
2) LCD Parms under the Main Menu.
3) Define Width and 4) Define Height
These options customize the x-axis and y-axis (u p and down) movement of
the cursor when 1) Tab Size is selected. Default is 8.
Scroll Window
1) Tab Size
2) Screen size
3) Define Width
4) Define Height
To Next Page
Loading...
