Display Data StreamChapter —6
282 TE 2000
5250 Terminal Emulation Programmer’s Guide
Move Cursor (MC)
Function
The MC order enables the host to move the cursor to a specified position
without modifying the home address, and without regard to the key-
board’s state.
Restrictions
None.
Format
The order takes the f ollowing form:
MC Order Row A ddress Column Address
Hex 14 1byte 1byte
If the WTD data stream contains multiple IC or MC orders, the last IC or
MC order determines the cursor position. The IC order negates any pre-
viously coded MC orders and the MC order negates any previously coded
IC orders, with the exception that the last IC order establishes home posi-
tion. To set the home position and then move the cursor, code the IC
order, and then the MC order. WTD control character values do not
affect the MC order, including the move cursor flag. See page 279 f or
more information.
Results
None.
To Next Page
Loading...
