Intermec CK30

Customizing Your Configuration—Chapter 5
185TE 2000
 5250 Terminal Emulation Programmer’s Guide
2415, 2425, 2435A, 2455, 2475, 248X Terminals
You can download more than one script file to a 2415, 2425, 2435A,
2455, 2475, or 248X Terminal, but immediately name the file to be used
as AUTOLOG.SCR and name any other script files with different names
ending with .SCR. To learn more about transferring files, refer to your
terminal’s user manual. Use one of the following download utilities to
copy your completed AUTOLOG.SCR file to the terminal.
Using Serial Port to Download File
1 Connect the terminal to the development personal computer or host.
Forhelp,refertoyourterminal’susermanualoryouraccessorydocu-
mentation.
2 Load the AUTOLOG.SCR f ile into drive C, where the TE 2000 ap-
plicationisstored.Forhelp,refertoyourterminal’susermanual.
3 Use T24XCOPY.EXE (from the developer’s kit) to copy the file directly
to drive C: on the terminal; or use LOADER.EXE (from the flash up-
grade) to copy the file to the terminal in flash mode using the following
command:
loader AUTOLOG.SCR
Using RF Communications to Download File
Note: Loading the AUTOLOG.SCR file from the Intermec Application
Server is supported.
1 Copy the AUTOLOG.SCR file to the Intermec Application Server.
2 Configure the download server on the Intermec Application Server to
send AUTOLOG.SCR to the terminals in groups of 10 or less.
3 Start the download.
When the terminal is reset, it clears the auto-login information, such as
the password and user’s name. Cancel the auto-login process by pressing
any key during the auto-login sequence. When a host session is broken,
you can restart the auto-login sequence by rebooting your terminal.
5020 Data Collection PC
The 5020 Data Collection PC User’s Manual (P/N: 068975) has compre-
hensive information regarding 5020 file management. Below is an excer pt:
Downloading a File
1 From the host computer or PC, connect to the 5020 Terminal u sing a
web browser and start the Unit Manager application. For help, see the
5020 PC User’s Manual.
2 Click File Manager to access the main File Manager screen.
3 Click the option button next to the parent directory where the file to
download is located, then click Go To to access its contents. To down-
load a file to the current directory on the 5020 Terminal, do step 4.
4 Go to the File Upload form at the bottom of the main File Manager
screen on the host computer and click the Browse button.