Intermec CK30

Using the Terminal Emulation Menus—Chapter 4
99TE 2000
 5250 Terminal Emulation Programmer’s Guide
Note: You can also scan this bar code label to access the Main Menu.
TE configuration menus
*/ETECFG*
*%TECFG*
Opening the Main Menu
The Main Menu is the first screen displayed when you open the computer
menus. All other menus are accessed f r om the Main Menu. At the initiali-
zation screens or anywhere in a TE session, press the appropriate keys to
access the Main Menu (defined within each terminal’s specific information).
After the Main Menu appears, enter a number (1–7) to make a selection.
2415, 2425, 2435A, 2455, 2475, 248X Menus
The following menus pertain to the 2415, 2425, 2435A, 2455, 2475, and
248X Terminals.
To return to the Main Menu, press [Enter] several times, then select
6) Exit Menus,toreturntotheoperatingsystem.
LCD Parms
1)
2) Screen Size
3) Screen Mode
4) Annunciators
5)
6) Key Uppercase
7) Scroll Window
Main Menu 2
1) Keyboard Opts
2) Save Parms
3)
4)
Tests
1) Peripherals
2)
3)
4)
5) Numbers
6) Timed Numbers
Set-up Parms
1) Communication
2) Barcode Parms
3) Protocol Opts
4) Display Opts
5) Radio Comm
6) Cold Start
7) More
[1] [2]
[4]
[5] [7]
Version Info
Firmware
<TE Program Name>
Version <number>
Date <ddmmyy>
Beeper Setup
1)
2) Error Tone
3) Beeper Select
[3]
Main Menu
1) Set-up Parms
2) LCD Parms
3) Beeper Setup
4) Tests
5) Version Info
6) Exit Menus
7) More
5) Radio Comm is blank for 2415,
2425, 2435A, 2455, 2475, 248X
Terminals without either an 802.1x
supplicant radio driver or UDP
Plus.