Intermec CK30

Using the Terminal’s Keyboard—Chapter 3
55TE 2000
 5250 Terminal Emulation Programmer’s Guide
37 -Key Keyboard
The 37-key keyboard has standard numeric keys, an [Enter] key, and
user-defined fu nction keys in its primary plane. It has alphabetic keys in its
secondary plane, and the special character “ . ” (period).
Because a radio terminal with a 37-key keyboard does not have alphabetic
keys, follow these procedures when using its TE configuration menus and
downloading software to it:
S To access password-protected menus, press [Gold], [Black], [F12],
[F11], then type “52401” for the password; or press [Black], [F3 ],
[Black], then type “52401” for the password.
S To initiate the COLD START? menu option, press [F10] to answer
“yes.”
S To download software, h old down the [F1] key as you power up the
radioterminaltogointodownloadmode.Thisissimilartoholding
down the [I] key on the standard 57-key keyboard.
17XX Cursor Keys
To Enter Press the Keys
Window/viewport up [Gold] [Y]
Window/viewport down [Gold] [B]
Window/viewport right [Gold] ["]
Window/viewport left [Gold] [A]
17XX Paging Keys
To Enter Press the Keys
Page up [Black] [Y]
Page down [Black] [B]
Page right [Black] ["]
Page left [Black] [A]
17XX Tab Keys
To Enter Press the Keys
Back Tab [A]
Forward Tab ["]