Intermec CK30

Using the Terminal Emulation MenusChapter —4
134 TE 2000
 5250 Terminal Emulation Programmer’s Guide
Note: 7) Native is enabled by default to preserve backwards compatibility.
7) Native (2415, 2425, 2435A, 2455, 2475, 248X, 6400, and 5055 with WTP,
59XX, 17XX, 11XX)
S For 2415, 24 25, 2435A, 2455, 2475, 248X with WTP:
When enabled, pressing [F1 ] is equivalent to pressing [FnL] [7]
(Home), while pressing [F2] is equivalent to pressing [F1],etc.When
disabled, [F 1] is equiv alent to [F1 ], [F2] is equ iv alent to [F2 ],etc.
S For 2435A Terminals with 48-key keyboards:
When enabled, pressing [F1 ] is equivalent to pressing Green > ,
H .(Home), while pressing [F 2] is equivalent to pressing Orange > ,
1 ,etc.Whendisabled,[F1] is equivalent to pressing Orange > , 1 ,
[F2] is equivalent to pressing Orange > , 2 ,etc.
S For 6400 Computers with WTP on a 51-key keyboard:
When enabled, pressing [F1 ] is equivalent to pressing [Blue] [0],while
pressing [F2] is equivalent to pressing [Blue] [1 ],etc.Whendisabled,
[F1] is equivalent to [Blue] [1], [F2] is equ iv alent to [Blue] [2],etc.
S For 6400 Computers with WTP on a 41-key keyboard:
When enabled, pressing [F1 ] is equivalent to pressing [Blue] [Space].
S For 5055 Terminals with WT P:
When enabled, pressing [F1 ] is equivalent to pressing [Blue] [0],while
pressing [F2] is equivalent to pressing [Blue] [1 ],etc.Whendisabled,
[F1] is equivalent to [Blue] [1], [F2] is equ iv alent to [Blue] [2],etc.
S For 59XX, 17XX, 11XX,
When enabled, pressing [F1 ] is equal to [Black] [0] and [F 2] is equal to
[Black] [1],etc.Whendisabled,[F1] is equal to [Black] [1], [F2] is
equal to [Black] [2],etc.
Native Mode
1) F1 is FUNC-0