Using the Terminal Emulation MenusChapter —4
96 TE 2000
5250 Terminal Emulation Programmer’s Guide
S Select Scanner Test to scan bar codes and view the bar code read and its
length. The first character of the bar code is the bar code type character.
Select ok or press Enter to exit this test.
S Select Keyboard Test to view the hex value of the pressed key and the
actual key value. Press Enter to exit this test.
S Select any of the Session 1 through Session 4 to go to that session.
S Select SIP Toggle to enable or disable the SIP keyboard.
To Next Page
Loading...
