Intermec CK30

Using the Terminal Emulation MenusChapter —4
162 TE 2000
 5250 Terminal Emulation Programmer’s Guide
To adjust the key click tone, press the appropriate Key Click option, then
press the up or down arrow keys to make the desired adjustment. Each key
press is accompanied by a tone at the new frequency or length. Press
[Enter] to confirm the selection and return to the 1) Key Click screen.
1) Volume (59XX)
Press [1], then the up/down arrow keys to adjust the volume from 0 to 32.
2) Length
Press [2], then the up/down arrow keys to adjust the length from 0 to 10.
3) Frequency (6400, 17XX, 11XX)
Press [3], then the up/down arrow keys to adjust the tone frequency in
steps f rom 0 to 32.
Length
Use Cursor Up
And Down Keys
To Adjust
Key Click> xx
Volume
Use Cursor Up
And Down Keys
To Adjust
Key Click> xx
Key Click
1) Volume
2) Length
3) Frequency
[1]
[2]
1) Volume is for 59XX
3) Frequency is for
6400, 17XX, 11XX
Frequency
Use Cursor Up
And Down Keys
To Adjust
Key Click> xx
[3]