Intermec CK30

Customizing Your Configuration—Chapter 5
197TE 2000
 5250 Terminal Emulation Programmer’s Guide
Trakker Antares terminals using WTP (2415, 2425, 2435A, 2455, 2475,
and 248X), support dual sessions. If the terminals use UDP Plus or
TCP/IP, then dual sessions are not supported.
Note: Only WTP terminals support dual sessions (“Session 2”). For a list
of terminals with WTP, see Chapter 1, “Getting Started.”
Set-Up Parameters Options
Note that brackets indicate default settings and values.
Set-Up Parameters Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
option
Channel
(900 MHz radio).
[Host A].Channel
Host B.Channel
Host C.Channel
10, 25, 30, 25, 30, 35, 40 6400, 5020, 5055,
11XX, 17XX, 59XX
Data Stream
Note: For TE 2000
application versions
6.60 and gre ater,
“VT/ANSI” is the
default data stream .
[Host A].Data Stream
Host B.Data Stream
Host C.Data S tream
Native (blank if UDP Plus
or TCP/IP), 3270, 5250,
[VT/ANSI]
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Frequency
(S-UHF radio)
[Host A].Frequency
Host B.Frequency
Host C.Frequency
Numeric, mi nimum = 0,
maximum = 0xFFFFFFFF
6400, 5020, 5055,
11XX, 17XX, 59XX
Host Name [Host A].Host
Host B.Host
Host C.Host
String, minimum = 0,
maximum = 16 [null string]
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Lan ID [Host A].Lan
Host B.Lan
Host C.Lan
Numeric, mi nimum = 0,
maximum = 254 [0]
applies to 900 MHz
Numeric, mi nimum = 0,
maximum = 15 [0]
applies to 2.4 GHz OpenAir
6400, 5020, 5055,
11XX, 17XX, 59XX
Mode [Host A].Mode
Host B.Mode
Host C.Mode
For 900 MHz radio:
DS 225K, DS 090K,
DS 450K
For S-UHF radio:
Freq Agility, Single Freq
6400, 5020, 5055,
11XX, 17XX, 59XX
Port Number [Host A].Port Number
Host B.Port Number
Host C.Port Number
Numeric, mi nimum = 0,
maximum = 65535 [23]
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Radio Configuration
Number
[Host A].Radio Config#
Host B.Radio Config#
Host C.Radio Config#
Numeric, mi nimum = 0,
maximum = 255 [0]
6400, 5020, 5055,
11XX, 17XX, 59XX