Intermec CK30

Customizing Your Configuration—Chapter 5
205TE 2000
 5250 Terminal Emulation Programmer’s Guide
UPC Options (continued)
Terminals using this
option
Values
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Options
Expand E to A UPC.Expand E to A Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
System 0 UPCE UPC.Sys 0 UPCE Enable d, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
System 1 UPCE UPC.Sys 1 UPCE Enable d, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
5020, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
EAN Options
Note that brackets indicate default settings and values.
EAN Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
option
Add-On 2 EAN.Add-On 2 Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Add-On 5 EAN.Add-On 5 Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Expand 8 to 13 EAN.Expand 8to13 Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60