Intermec CK30

Customizing Your Configuration—Chapter 5
207TE 2000
 5250 Terminal Emulation Programmer’s Guide
Code 39 Options (continued)
Terminals using this
option
Values
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Options
START Decode Code 39.START decode Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Interleaved 2 of 5 Option
Note that brackets indicate default settings and values.
Interleaved 2 of 5 Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
option
Interleaved 2 of 5
Chk Digit
Interleaved 2 of 5 Chk Digit Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Code 11 Option s
Note that brackets indicate default settings and values.
Code 11 Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
option
Check D igit 1 Code 11.Chk Dig 1 Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
5020, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60
Check D igit 2 Code 11.Chk Dig 2 E nabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
5020, 5055, 11XX,
17XX, 59XX, 700 Series,
CK30, CV60