Intermec CK30

Customizing Your Configuration—Chapter 5
209TE 2000
 5250 Terminal Emulation Programmer’s Guide
Code 128 Options (continued)
Terminals using this
option
Values
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Options
UCC F1 Value UPC.UCC F1 Value
EAN.UCC F1 Value
Code 128.UCC F1 Value
Code 39.UCC F1 Value
Codabar.UCC F1 Value
ABC Codabar.UCC F1 Value
Str 2of5.UCC F1 Value
Int 2of5.UCC F1 Value
CI 2of5.UCC F1 Value
Code 11.UCC F1 Value
Code 93.UCC F1 Value
Plessey.UCC F1 Value
Numeric, mi nimum = 0,
maximum = 255
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
5250 Protocol Options
Note that brackets indicate default settings and values.
5250 Protocol Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Values
Terminals using this
option
Allow Alias Allow Alias Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Allow Negotiate
Abou t Window Size
(NAWS)
Allow NAWS Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Auto Tab Scan Auto Tab Scan Enabled, [Dis abled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Beep On Error Beep On Error Enabled, [Disabled] 2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Device Name Device Name String, minimum length =
0, maximum length = 10
[null string] Default is
NULL for 6400, 5020,
5055, 17XX, 11XX, 59XX.
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60