Intermec CK30

Customizing Your Configuration—Chapter 5
215TE 2000
 5250 Terminal Emulation Programmer’s Guide
LCD Options (continued)
Terminals using this
option
Values
[Session 1]
Session 2
Session 3 (700 Series, CV60)
Session 4 (700 Series, CV60)
Options
YOrigin YOrigin Numeric minimum = 0,
maximum = 23 [0]
2415, 2425, 2435A,
2455, 2475, 248X,
6400, 5020, 5055,
11XX, 17XX, 59XX,
700 Series, CK30, CV60
Beeper Setup Options
Note that brackets indicate default settings and values.
Beeper Setup Options
Options
[Session 1]
Session 2
Values
Terminals using this
option
Beep Head Set Beep Head Set Enabled, [Disabled] 17XX
Beep Internal Beep Internal [Enabled], Disabled 6400, 5055, 11XX,
17XX
Beeper (Error Tone)
Frequency
Beep Frequency Numeric, minimum = 0,
maximum = 30 [13]*, [6]**
6400, 5055, 11XX,
17XX
* [13] is the default for 17XX, 11XX. ** [6] is the default for 6400.
Beeper (Error Tone)
Length
Beep Length Numeric, minimum= 1 ,
maximum= 10 [3]
6400, 5055, 11XX,
17XX, 59XX
Beeper (Error Tone)
Volume
Beep Volume Numeric , minimum = 0,
maximum = 255 [95]
59XX
Key Click
Frequency
KeyClick Freq Numeric, minimum = 0,
maximum = 30 [13]*, [6]**
6400, 5055, 11XX,
17XX
* [13] is the default for 17XX, 11XX. ** [6] is the default for 6400.
Key Click Length KeyClick Length Numeric, minimum = 1,
maximum = 10 [1]*, [6]**
6400, 5055, 11XX,
17XX, 59XX
* [1] is the default for 59XX, 17XX, 11XX. ** [6] is the default for 6400, 5055.
Key Click Volume KeyClick Volume Numeric, minimum = 0,
maximum = 255 [95]
59XX