Extended CommandsChapter —7
332 TE 2000
5250 Terminal Emulation Programmer’s Guide
Line 1, Columns 2 and 3, contains the extended command “#R”. Line 2,
Column 1, receives the returned data in the following format, where “X”
is the return v alue:
//1801f1\X0\<cr>
Line 24, Column 1, has the return status field. The status value returned
here will be “0” (the character for zero, not the value zero) for a good sta-
tus, indicating that the transaction is complete and without error. An error
will occur if this command is attempted from the wrong type of terminal.
However, no error is detected whe n you hav e a 248X Terminal without
terminal blocks. The status value returned when an error occurs is “1” (the
character, not the value).
To Next Page
Loading...
