Intermec CK30 - Page 430

Index
406 TE 2000
 5250 Terminal Emulation Programmer’s Guide
Error Reset key
17XX, 57
2415, 20
2425, 24
2435A, 29
2455, 33
2475, 36
248X, 36
5020, 43
5055, 49
11XX, 62
59XX, 53
6400, 40
700 series, 69
bar code label, 359
CK30, 75
CK31, 80
CV60, 86
description, 14
Error tone, 163, 313
beeper
frequency, 215
length, 215
volume, 215
Escape characters (Encoded Code 39), 363
European Article Numbering code. Se e EAN
Exchanging files , 251
Exit emulation
5055, 179
6400, 178
Exit menus, 170
Exit T E2000, 143
Expand 8 to 13
CONFIG.DAT option, 205
TE_SETTINGS.INI option, 225
Expand E to A
CONFIG.DAT option, 205
TE_SETTINGS.INI option, 224
“Expected numeric” message, 196
Extended Code 39, 324
CONFIG.DAT option, 206
TE_SETTINGS.INI option, 225
Extended c ommands, 123
Get Optical Inputs (#I), 330
Magnetic Card Reader (#M), 333
Receive Only (#G), 310
Relay Commands (#R), Set, Reset, Read, 331
Return Version (#V), 316
Scan (#S), 318
Set Parameters (#H), 313
Tone (#T), 317
Transmit and Receive (#F), 300
Transmit Only (#P), 306
F
Fast Cursor Left command, 5
Fast Cursor Right command, 5
FCWs, 265, 286, 293
FFW, 286
Field control words, 265, 286, 293
Field exit, escape sequence, 361
Field Exit field, 286, 289
Field Exit key
11XX, 61
17XX, 56
2415, 20
2425, 24
2435A, 29
2455, 32
2475, 35
248X, 35
5055, 48
59XX, 52
6400, 40
700 series, 69
bar code label, 358
CK30, 75, 79
CV60, 86
description, 13
system codes for, 296
Field Format Word, 286
Field Mark key
11XX, 62
17XX, 57
2415, 21
2425, 24
2435A, 29
2455, 33
2475, 36
248X, 36
5020, 44
5055, 49
59XX, 53
6400, 40
700 series, 69
bar code label, 360
CK30, 75
CK31, 80
CV60, 86
description, 15
Field+ key
11XX, 62
17XX, 57
2415, 21
2425, 24
2435A, 29
2455, 33
2475, 36
248X, 36
5020, 44
5055, 49
59XX, 53
6400, 40
700 series, 69
bar code label, 360
CK30, 75
CK31, 80
CV60, 86
description, 15