Jabiru j430 - This Document Is Controlled While It Remains on the Jabiru Server. Once this no Longer Applies the Document Becomes Uncontrolled

Aircraft Technical Manual
Jabiru Aircraft Pty Ltd
JTM001-5
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 167 of 298
6.59.3 Flap Position Indicator Inspection & Repair
Required Tools:
N/A
Parts and Material:
Replacement parts (as required)
Type of Maintenance:
Line Maintenance
Level of Certification:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Return to Service:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
 Repair of the position indicator is limited to replacing worn or damaged parts.
6.59.4 Flap Position Indicator Installation
 Installation procedure is the reverse of the removal procedure outlined above.
Required Tools:
Screwdrivers
Spanners / Socket Wrench
Rivet gun
Parts and Material:
Replacement parts (as required)
Replacement rivets (as required)
Type of Maintenance:
Line Maintenance
Level of Certification:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Return to Service:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Figure 118 – Flap Position Indicator – Type 1