Aircraft Technical Manual
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
21.1.6 Control Systems (refer to section 5.13)
CARRIED OUT BY (print name)....................................(signature)................................(date)............
Controls – Full & free movement, correct direction of travel without interference
Clamps and Cables – Check correct assembly, indexed, hardware in good condition
Rod ends – Inspect for condition and security
Trim controls and cables - Check all hardware and cables, ensure good condition and secure
Travel stops – Check they are correctly adjusted and secure
Decal & labels – Ensure they are in place and in good condition
Flap control & linkages – Cycle flaps, ensure free & full travel movement
Elevator controls & linkages – Check all hardware, ensure good condition and secure
Rudder pedals & linkages - Check all hardware, ensure good condition and secure
Aileron controls and linkages - Check all hardware, ensure good condition and secure
Exterior surface of control surfaces – Check for cracking, fraying and other damage
To Next Page
Loading...