Jacobsen Eclipse 322

CHASSIS
4222983 Second Edition 5-23
5
Assembly Notes
• Assemble input shaft ball bearings in reverse order of
removal.
• Clean and inspect input shaft ball bearings (7 and 9)
for wear or damage. Replace as needed.
• Lubricate input shaft ball bearings (7 and 9) with
Mobilfluid 424 or SAE 30 oil prior to installation.
• Install input shaft ball bearings on input shaft until
seated against bearing shoulders using a suitable
press.
• Install new O-ring (6). Lubricate O-ring with Mobilfluid
424 or SAE 30 oil prior to installation.