Johnson Controls VSD Series User Manual

Powered by Eaton Technology VSD Series Drives User Manual
LIT-1201828 For more information visit: www.johnsoncontrols.com 1-1
November 2009
Chapter 1 — Overview
This chapter describes the purpose and contents of this manual, the receiving inspection
recommendations and the Johnson Controls VSD Series Open Drive catalog numbering
system.
How to Use This Manual
The purpose of this manual is to provide you with information necessary to install, set and
customize parameters, start up, troubleshoot and maintain the Johnson Controls VSD Series
drive powered by Cutler-Hammer
®
technology from Eaton’s electrical business. To provide
for safe installation and operation of the equipment, read the safety guidelines at the
beginning of this manual and follow the procedures outlined in the following chapters before
connecting power to the VSD Series drive. Keep this operating manual handy and distribute
to all users, technicians and maintenance personnel for reference.
Chapter 1 – Overview
Chapter 2 – Mounting
Chapter 3 – Power Wiring
Chapter 4 – Control Wiring
Chapter 5 – IntelliPass Bypass Option
Chapter 6 – Menu Information
Chapter 7 – Start-Up
Chapter 8 – Johnson Controls Metasys N2 Protocol
Chapter 9 to 14 – Applications
Chapter 15 – Description of Parameters
Appendix A – Technical Data
Appendix B – Fault and Warning Codes
Appendix C – Accessories
Receiving and Inspection
The VSD Series AC drive has met a stringent series of factory quality requirements before
shipment. It is possible that packaging or equipment damage may have occurred during
shipment. After receiving your VSD Series drive, please check for the following:
● Check to make sure that the package(s) includes the VSD Series drive, the User Manual,
rubber conduit covers, screws, conduit plate and ground straps.
● Inspect the unit to ensure it was not damaged during shipment.
● Make sure that the part number indicated on the nameplate corresponds with the
Catalog Number on your order.
If shipping damage has occurred, please contact and file a claim with the carrier involved
immediately.
If the delivery does not correspond to your order, please contact your Johnson Controls
representative.
Note: Do not destroy the packing. The template printed on the protective cardboard can be
used for marking the mounting points of the VSD Series on the wall or cabinet.

Johnson Controls VSD Series Specifications

General

Brand	Johnson Controls
Model	VSD Series
Category	DC Drives
Language	English