Powered by Eaton Technology VSD Series Drives User Manual
LIT-1201828
For more information visit: www.johnsoncontrols.com 6-17
November 2009
Table 6-7: Trip Counters
Note: The Trip Counters operate only when the motor is running.
Table 6-8: Software Information
Table 6-9: Application Information
S5.8.2
Trip Counters
Trip counters
The Trip Counters are counters whose values can be reset to zero. The resettable
counters are shown in Table 6-7.
Number Name Description
T5.8.2.1 MWh counter Megawatts hours since last reset
P5.8.2.2 Clear MWh
counter
Resets megawatts hours counter
T5.8.2.3 Power On day
counter
Number of days the drive has been run since the last
reset
T5.8.2.4 Power On hour
counter
Number of hours the drive has been run since the last
reset
P5.8.2.5 Clr Optime cntr Resets the operating day and hour counters
S5.8.3
Software
Information
Software
The Software information page includes information on the following software
related topics:
Number Name Description
I5.8.3.1 Software
package
SVX00031V010 or later
I5.8.3.2 System
software
version
11.62.7486 or later
I5.8.3.3 Firmware
interface
4.45 or later
I5.8.3.4 System load XX % (actual value)
S5.8.4
Application
Information
Applications
The Application information page includes information on not only the application
currently in use but also all other applications loaded into the drive. The information
available is shown in Table 6-9. Note that the “x” in the table refers to the sequential
number of the application in the list.
Name Content
A5.8.4.x Application name
D5.8.4.x.1 Application ID
D5.8.4.x.2 Version
D5.8.4.x.3 Firmware interface
To Next Page
Loading...
Need help?
General
