VSD Series Drives User Manual Powered by Eaton Technology
A-2 For more information visit: www.johnsoncontrols.com LIT-1201828
November 2009
Environment, continued
Vibration EN 50178, EN 60068-2-6
5 to 50 Hz, displacement amplitude 1 mm (peak) at 3 to 15.8 Hz, Max.
acceleration amplitude 1 G at 15.8 to 150 Hz
Shock EN 50178, EN 60068-2-27
UPS Drop test (for applicable UPS weights)
Storage and shipping: max. 15 G, 11 ms (in package)
Enclosure Class TYPE 1/IP21 standard 250 hp and below
Open chassis standard 300 hp and above
Standards
EMC (at default settings) Immunity: Fulfils all EMC immunity requirements
Emissions: EN 61800-3
Safety UL 508C
Product IEC 61800-2
Control Connections
Analog Input Voltage 0 to 10V, R - 200W differential (-10 to 10V joystick control)
Resolution 0.1%; accuracy ±1%
Analog Input Current 0(4) to 20 mA; R
i
– 250W differential
Digital Inputs (6) Positive or negative logic; 18 to 24V DC
Auxiliary Voltage 24V DC ±15%, max. 250 mA
Output Reference Voltage +10V +3%, max. load 10 mA
Analog Output 0(4) to 20 mA; R
L
max. 500W ; Resolution 10 bit; Accuracy ±2% or
0 to 10V, R
L
1 kW , select with jumper
Digital Outputs Open collector output, 50 mA/48V
Relay Outputs 2 programmable Form C relay outputs
Switching capacity: 24V DC / 8A, 250V AC / 8A, 125V DC / 0.4A
Minimum switching load: 5V/10 mA
Continuous capacity: <2 A
rms
Protections
Overcurrent Protection Yes
Overvoltage Protection Yes
Undervoltage Protection Yes
Ground (Earth) Fault In case of a ground fault in motor or motor cables, only the VSD Series
is protected
Input Phase Supervision Trips if any of the input phases are missing
Motor Phase Supervision Trips if any of the output phases are missing
Overtemperature Protection Yes
Motor Overload Protection Yes
Motor Stall Protection Yes
Motor Underload Protection Yes
Short Circuit Protection of the
24V DC and +10V DC
Reference Voltages
Yes
Programmable Automatic
Restart Options
Yes — Disable; Automatically transferred to Bypass; Reset drive only;
Reset drive, if fails, then transferred to Bypass
Table A-1: VSD Series Drive Specifications (Continued)
Description Specification
To Next Page
Loading...
Need help?
General
