Powered by Eaton Technology VSD Series Drives User Manual
LIT-1201828
For more information visit: www.johnsoncontrols.com A-15
November 2009
EMC Capability
General
For products used within the European Community (EC), the Electro Magnetic Compatibility
(EMC) directive states that the electrical equipment must not disturb the environment and
must be immune to other Electro Magnetic Disturbances in the environment.
The design intent was to develop a family of drives, which is user friendly and cost effective,
while fulfilling the user’s needs. EMC compliance was a major consideration from the outset
of the design.
The VSD Series drives are is targeted at the world market. To ensure maximum flexibility, yet
meet the EMC needs of different regions, all drives meet the highest immunity levels, while
emission levels meet the requirements noted in the following section.
EMC Classification
the VSD Series drives are EMC classification H capable.
Class H:
VSD Series drives have been designed to fulfill the requirements of the product standard
EN 61800-3_A11 for the 1st environment restricted distribution and the 2nd environment.
The emission levels correspond to the requirements of EN 61000-6-4.
VSD Series drives fulfill all applicable EMC immunity requirements (standards EN 61000-6-1,
EN 61000-6-2 and EN 61800-3+A11).
Declaration of Conformity
The Manufacturer’s Declarations of Conformity assuring the compliance of the VSD Series
drives with the European Community (EC) EMC-directives is available upon request.
To Next Page
Loading...
Need help?
General
