VSD Series Drives User Manual Powered by Eaton Technology
5-18 For more information visit: www.johnsoncontrols.com LIT-1201828
November 2009
Additional Instructions for Keypad Operation
Procedure to run in bypass operation from keypad.
1. Press the BYPASS button: “Activate Bypass? Press ENTER” will appear on keypad
display.
2. Press the HOA button to select desired control location, e.g. HAND. Bypass mode LED
will start flashing.
3. Press the START button: “Motor Running in BYPASS!” will appear on the keypad
display.
● Motor is running in bypass.
● Run LED is lit solid.
Procedure to return to drive operation from keypad.
1. Press the STOP button.
2. Press the BYPASS button: “Return to Drive? Press Enter!” will appear on keypad
display.
3. Press the ENTER button to return to drive operation.
● Bypass is disabled.
● Ready LED is lit solid.
BYPASS will be disabled in all control sources only when B5 option board is removed from
Slot C.
To Next Page
Loading...
Need help?
General
