VSD Series Drives User Manual Powered by Eaton Technology
6-4 For more information visit: www.johnsoncontrols.com LIT-1201828
November 2009
Main Menu Navigation
The data on the control keypad are arranged in menus and submenus.
The first menu level consists of menus M1 to M8 and is called the Main menu. These menus
and their submenus are illustrated in Figure 6-2.
Navigation Tips
● To navigate within one level of menu, use the up and down arrows.
● To move deeper into the menu structure and back out, use the right and left arrows.
● To edit a parameter, navigate to show that parameter’s value, and press the right arrow
button to enter the edit mode. In edit mode, the parameter value will flash.
● When in edit mode, the parameter value can be changed by pressing the up or down
arrow keys.
● When in edit mode, pressing the right arrow a second time will allow you to edit the
parameter value digit by digit.
● To confirm the parameter change you must press the ENTER key. The value will not
change unless the ENTER button is pushed.
Note: For special navigation tips for M8, see Page 6-21.
To Next Page
Loading...
Need help?
General
