5
5.9
5 – 28
Setting the video HIGH level
The video HIGH level is a signal level used for tracking a target in the near distance.
As the setting value is smaller, the target with a weaker signal becomes easy to track, but if it is too small, the
sea clutter return and the like are tracked.
Procedures
1. Press the
4
key twice in the procedure 6 of “Setting the video TD
level” to select "VIDEO HIGH LEVEL".
2. Press the
0
to
9
keys to enter the value of the video level and
press the
ENT
key to fix this setting.
Exit
3. Press the
SUB
MENU
key.
Setting the video LOW level
The video LOW level is a signal level used for tracking a target in the far distance. When a weak target in the
far distance is difficult to track, decrease the setting value.
When the level is increased exceedingly, the noise is tracked.
Procedures
1. Press the
5
key twice in the procedure 6 of “Setting the video TD
level” to select "VIDEO LOW LEVEL".
2. Press the
0
to
9
keys to enter the value of the video level and
press the
ENT
key to fix this setting.
Exit
3. Press the
SUB
MENU
key.
To Next Page
Loading...
Need help?
General
