JRC JMA-7710-6 - Page 89

3
3 – 30
3.3
To set the alarm sound
Specify whether to output alarm sound in case of an alarm or not.
Procedures
Procedures
1. Press the
GZ
MENU
key to open RADAR ALARM menu.
2. Press the
5
key to select "AUDIBLE RADAR ALARM".
3. Press the
5
key to select "OFF" or "ON".
4. Press the
ENT
key to confirm the setting.
Exit
Exit
5. Press the
GZ
MENU
key.
To set the alarm detection level
Set the signal level for outputting an alarm.
Procedures
Procedures
1. Press the
GZ
MENU
key to open RADAR ALARM menu.
2. Press the
4
key to select "RADAR SENSITIVITY LEVEL".
3. Press the
4
key to select the level between "1" and "4".
4. Press the
ENT
key to confirm the setting.
Exit
Exit
5. Press the
GZ
MENU
key.