2-33
Alarm
①：Alarm acknowledgment
When the button is clicked, the buzzer sound of the alarm that is currently issued is stopped and the alarm
lamp stops blinking. If multiple alarms are issued, the next alarm to be acknowledged is displayed.
When the button is clicked, the alarm displayed on the top is acknowledged.
The alarms that are currently issued are displayed at the bottom one by one.
②：Error log display
When the button is clicked, the error log is displayed.
③：Function change
When this button is clicked, the function changing menu is displayed, and will change the selecting
operation mode.
Mode can be changed by selected either ECDIS mode or RADAR mode.
To Next Page
Loading...
Need help?
General
